Intraoperative fat embolism syndrome associated with implantation of titanium sacroiliac joint fusion implants: a report of two cases.

Background: For patients undergoing long-construct fusion surgeries, simultaneous sacroiliac joint (SIJ) fusion is a growing trend in spine surgery. Some options for posterior SIJ fusion include 3D-printed triangular titanium implants or self-harvesting SIJ screws. Both implants require fixation within the sacrum and ileum. Fat embolism syndrome is a rare but known complication of lumbar pedicle instrumentation but has never been reported in association with SIJ fusion, regardless of implant type. We report the first two known cases of fat embolism associated with placement of SIJ fusion devices during long construct posterior spine fusion. Case Description: Case 1-a 50-year-old female with multiple previous spine surgeries complicated by osteomyelitis/diskitis that was successfully eradicated, underwent T10-pelvis posterior spinal fusion (PSF), L4 pedicle-subtracting-osteotomy, and bilateral SIJ fusion. During implantation of each SIJ fusion device, the patient's hemodynamic status deteriorated necessitating vasopressor support, intravenous fluid bolus, and hyperventilation, but quickly resolved. The case was completed without further issue, and she had an uneventful post-operative course. Case 2-a 71-year-old female with a past medical history of ankylosing spondylitis, previous L2-L5 PSF, rheumatoid arthritis on chronic steroids, underwent a T9-pelvis PSF, bilateral SIJ fusion, L4 pedicle subtraction osteotomy, T10-L1 Smith Peterson osteotomies. After implantation of the second SIJ fusion device, she became hypotensive and tachycardic, pulses were absent, and cardiopulmonary resuscitation was initiated. Pulses returned quickly, the index surgery was terminated, and she was transferred to the intensive care unit (ICU). In the ICU she was quickly weaned off the ventilator on post-operative day 1. On post-operative day 4, the patient returned to the operating room for completion of the surgery and had an extended, but uneventful, recovery afterwards. Conclusions: We report on the first two known cases of fat embolism syndrome occurring immediately after implantation of SIJ fusion devices. Spine surgeons should be aware of this rare, but potentially fatal, complication. Collaboration with the anesthesia team and optimization of the patient's hemodynamic status prior to implantation may help prevent catastrophic complications.

Treatment of Spinal Infections.

The treatment of spinal infections is not well defined, and a cursory review of the literature can lead to conflicting treatment strategies. To add to the complexity, infections can include primary infection of the spine, infection secondary to another primary source, and postoperative infections including epidural abscesses, discitis, osteomyelitis, paraspinal soft-tissue infections, or any combination. Furthermore, differing opinions often exist within the medical and surgical communities regarding the outcomes and effectiveness of varying treatment strategies. Given the paucity of defined treatment protocols and long-term follow-up, it is important to develop multidisciplinary treatment teams and treatment strategies. This, along with defined protocols for the treatment of varying infections, can provide the data needed for improved treatment of spinal infections.

Genetics of Intervertebral Disc Degeneration.

PURPOSE OF REVIEW: Intervertebral disc degeneration is a contributor to chronic back pain. While a part of the natural aging process, early or rapid intervertebral disc degeneration is highly heritable. In this review, we summarize recent progress towards unraveling the genetics associated with this degenerative process. RECENT FINDINGS: Use of large cohorts of patient data to conduct genome-wide association studies (GWAS) for intervertebral disc disease, and to lesser extent for aspects of this process, such as disc height, has resulted in a large increase in our understanding of the genetic etiology. Genetic correlation suggests that intervertebral disc disease is pleiotropic with risk factors for other diseases such as osteoporosis. The use of Mendelian Randomization is slowly establishing what are the causal relationships between intervertebral disc disease and factors previously correlated with this disease. The results from these human genetic studies highlight the complex nature of this disease and have the potential to lead to improved clinical management of intervertebral disc disease. Much additional work should now be focused on characterizing the causative relationship various co-morbid conditions have with intervertebral disc degeneration and on finding interventions to slow or halt this disease.

Alternative Uses of O-Arm and Stealth Navigation Technology Over 10 Years: The University of Colorado Experience.

Intraoperative computed tomography scanning with O-arm and use of Stealth navigation can improve surgical outcomes in a variety of orthopedic subspecialties. In spine surgery, the accuracy, precision, and safety of pedicle screw and interbody implant placement has improved. This technology is now routinely used in percutaneous pedicle screw placement and minimally invasive sacroiliac joint fusion. Other applications include, but are not limited to, isthmic pars defect repair, lumbosacral pseudoarticulation resection in Bertolotti's syndrome, radiofrequency ablation, and en bloc tumor resection. Intraoperative navigation has numerous applications, and use of this technology should continue to evolve as the technology advances. [Orthopedics. 2023;46(2):e89-e97.].

Catastrophic acute failure of pelvic fixation in adult spinal deformity requiring revision surgery: a multicenter review of incidence, failure mechanisms, and risk factors.

OBJECTIVE: There are few prior reports of acute pelvic instrumentation failure in spinal deformity surgery. The objective of this study was to determine if a previously identified mechanism and rate of pelvic fixation failure were present across multiple institutions, and to determine risk factors for these types of failures. METHODS: Thirteen academic medical centers performed a retrospective review of 18 months of consecutive adult spinal fusions extending 3 or more levels, which included new pelvic screws at the time of surgery. Acute pelvic fixation failure was defined as occurring within 6 months of the index surgery and requiring surgical revision. RESULTS: Failure occurred in 37 (5%) of 779 cases and consisted of either slippage of the rods or displacement of the set screws from the screw tulip head (17 cases), screw shaft fracture (9 cases), screw loosening (9 cases), and/or resultant kyphotic fracture of the sacrum (6 cases). Revision strategies involved new pelvic fixation and/or multiple rod constructs. Six patients (16%) who underwent revision with fewer than 4 rods to the pelvis sustained a second acute failure, but no secondary failures occurred when at least 4 rods were used. In the univariate analysis, the magnitude of surgical correction was higher in the failure cohort (higher preoperative T1-pelvic angle [T1PA], presence of a 3-column osteotomy; p < 0.05). Uncorrected postoperative deformity increased failure risk (pelvic incidence-lumbar lordosis mismatch > 10°, higher postoperative T1PA; p < 0.05). Use of pelvic screws less than 8.5 mm in diameter also increased the likelihood of failure (p < 0.05). In the multivariate analysis, a larger preoperative global deformity as measured by T1PA was associated with failure, male patients were more likely to experience failure than female patients, and there was a strong association with implant manufacturer (p < 0.05). Anterior column support with an L5-S1 interbody fusion was protective against failure (p < 0.05). CONCLUSIONS: Acute catastrophic failures involved large-magnitude surgical corrections and likely resulted from high mechanical strain on the pelvic instrumentation. Patients with large corrections may benefit from anterior structural support placed at the most caudal motion segment and multiple rods connecting to more than 2 pelvic fixation points. If failure occurs, salvage with a minimum of 4 rods and 4 pelvic fixation points can be successful.

Pre-Operative Planning in Complex Deformities and Use of Patient-Specific UNiD™ Instrumentation.

STUDY DESIGN: Review of current literature and authors experience. OBJECTIVE: Pre-operative planning is an integral part of complex spine surgery. With the advent of computer-assisted planning, multiple surgical plans can be evaluated utilizing alignment parameters, and the best plan for individual patients selected. However, the ability to evaluate and measure surgical correction goals intraoperatively are still limited. The use of patient-specific UNiD rods, created based on pre-operative plans, provided an initial tool for implementation of pre-operative plans in the operative setting. METHODS: A literature review for the use of patient-specific UNiD rods in thoracolumbar spine complex surgery was performed. The articles were selected and reviewed for the initial experience/outcomes of these techniques. Further, the initial experience of the authors at The University of Colorado is described. RESULTS: The use of UNiD patient-specific rods, in combination with pre-operative planning has been shown to provide a higher rate of patients with spinopelvic alignment parameters within currently accepted ranges. This includes improvement of sagittal vertical axis (SVA) < 50 mm and pelvic incidence (PI)-lumbar lordosis (LL) = ± 10°. Multiple authors have shown improvement in pelvic tilt to age adjusted values but note continued difficulties in obtaining correction goals. CONCLUSIONS: The use of pre-operative planning software and UNiD patient-specific rods has been shown to improve surgeon's ability to achieve spinopelvic alignment parameters, specifically SVA and PI-LL, along with other possible benefits. Further research is needed regarding long-term value of the technology.

Laser Marking of Spine Rods Is Strongly Associated With Risk of Clinical Rod Failure.

INTRODUCTION: What is overlooked in clinical studies are the possibilities of manufacturing and design aspects of the instrumentation that could initiate rod fracture. Although revision because of hardware fracture is a small fraction of the overall revision rates (12.1% to 13.7%), there are sufficient numbers of revision cases where hardware removed can undergo a thorough metallurgic analysis. This study is unique in that rod characteristics, such as alloy, surface markings, and fracture type, seen at fracture surfaces are considered in the analysis. METHODS: This work was conducted under both a retrospective and prospective IRB. Patients considered for this study were between the ages of 18 and 85 years who underwent or were undergoing revision spine surgery with previous instrumentation in the cervical, thoracic, or lumbar region and evidence of at least one of the following: catastrophic hardware failure, pseudarthrosis, implant loosening, or nonfusion. Inclusion criteria were determined through radiographic and medical records review. RESULTS: Fifty-six patients who had revision procedures because of different indications were included; 101 rods were removed, tested for fracture, and included in the analysis. Laser marking is significantly (P < 0.0001) associated with rod fracture. Detailed analysis showed notable surface and subsurface changes as the result of the marking, such as surface melting, cracking, and notching, creating locations to initiate a fracture. The three most informative variables to clinical rod fracture using multiple regression modeling were body mass index, presence or absence of laser mark (yes/no), and length of posterior fusion (≤2 spinal levels/>2 spinal levels). It was found that the relative risk of rod fracture is 23 times higher during 20 postoperative years than in cases with this index <0.4. DISCUSSION: For a patient with a given body mass index, if they require a multilevel fixation greater than two levels and rods with laser marks are used, the risk of early rod fracture increases by 40%.

The University of Colorado Virtual Physical Examination for Spine Surgeons: A Preliminary Study.

As coronavirus disease 2019 (COVID-19) reached pandemic status, in-person orthopedic clinics across the United States were forced to close as many states adopted stay-at-home orders. Previously, the use of telemedicine in orthopedic practices was minimal for a variety of reasons, one being the inability to perform a physical examination in a specialty reliant on direct patient contact for diagnosis and treatment. A prospective cohort of 52 patients consented to participate in a novel virtual physical examination protocol during routine telemedicine visits at a large, tertiary orthopedic spine practice. Participants were asked to perform a series of carefully designed physical maneuvers using readily available household objects to allow their provider to better assess sensory and motor function in the tele-medicine setting. Patients were then asked to complete a short satisfaction survey. In total, 52 patients completed the physical examination and survey. Males and females were distributed evenly among the cohort at 50%. The mean age was 52.1±15.5 years. The average score for ease of understanding the examination (1=easiest, 5=hardest) was 1.1, while the average score for ease of performance was 1.5. Most participants (97.56%) felt their provider was better able to understand their condition using the virtual examination findings. This study highlights the utility of a virtual physical examination for assessment of spine patients in the telemedicine setting. Furthermore, this study illustrates the ease with which such an examination can be implemented and performed to improve patient evaluation and satisfaction. [Orthopedics. 2022;45(1):e7-e10.].

Evaluation of Spinous Process Tethering at the Proximal End of Rigid Constructs: In Vitro Range of Motion and Intradiscal Pressure at Instrumented and Adjacent Levels.

BACKGROUND: Adult spinal deformity surgery requires use of long thoracolumbar instrumentation, which is associated with risk of postoperative proximal junctional kyphosis (PJK). Tethering has been used in spinal surgery but not around the spinous process (SP) in the context of preventing PJK. METHODS: Researchers applied a nondestructive hybrid loading protocol to 7 T8-L2 cadaveric specimens in flexion-extension, lateral bending, and axial rotation (AR). A rigid construct (pedicle screws and rods) and 1- and 2-level SP constructs were tested, as was a hand-tie technique. SP tethering (SPT) constructs use clamps on both sides of the SP; SPT helix constructs use 1 clamp and wrap around the SP. RESULTS: All tether constructs showed greater motion at the instrumented level and less motion at adjacent levels compared to rigid constructs. In AR, 1- and 2-level SPT constructs restricted first instrumented level motion to a greater extent when compared with other tether constructs (P ≤ .05). Passing the band through the T10 SP did not produce significant biomechanical differences compared to passing it through the T9-T10 interspinous ligament (P > .05). Hand-tied constructs demonstrated more motion compared to tensioned constructs (P > .05). Intradiscal pressure results corroborated motion data. CONCLUSIONS: SPT at the proximal end of a rigid construct produced more favorable biomechanical outcomes at instrumented and adjacent levels than were seen with a completely rigid construct. Clinical research is needed to determine whether these methods reduce the risk of PJK among patients. LEVEL OF EVIDENCE: 3. CLINICAL RELEVANCE: This work sheds light on the biomechanical stability of proximal tethering constructs in an effort to enhance the surgeon's ability to reduce rates of proximal junctional kyphosis and failure in thoracolumbar spinal fusion surgery.

Corrosion of Titanium Spinal Explants Is Similar to That Observed in Oil Field Line Pipe Steel: Evidence of Microbial-Influenced Corrosion In Vivo.

Current explanations of biomedical alloy degradation are focused on the physicochemical mechanisms of galvanic, pitting, crevice, and fretting corrosion. Ultimately, these studies dismiss the corrosion mechanism as a function of the local microbiome. Sixty spine hardware constructs were examined immediately after explantation for biofilm formation. Marked rod sections were imaged using scanning electron microscopy with energy dispersive x-ray spectroscopy. Backscatter mode was employed to better image the topology of the surface. There is clear differentiation between discoloration due to corrosion vs mechanical damage. Under scanning electron microscopy backscatter electron shadow examination, the authors noted that not all biofilm was removed using the surgical wipes. Corrosion pits were noticeably larger and numerous in areas of biofilm. In areas not associated with biofilms, there were few pits even if mechanical wear was evident. There is no evidence that the surface corrosion is modified between clinically diagnosed infected and noninfected patients. The surface damage present on explanted Ti6Al4V spine rods is uniquely similar to damage found in other industries where microbial-influenced corrosion is prevalent. Given that similar anaerobic, sulfur-reducing bacteria reside in and on human tissues, it is most likely that corrosion observed on explanted hardware is the result of microbial-influenced corrosion and not from inflammatory or other processes. Using analysis methods from other industries to characterize the microbiome present on explanted hardware is necessary. In so doing, a new definition of hardware-induced infection will be forthcoming. [Orthopedics. 2020;43(1):62-67.].

Strap stabilization for proximal junctional kyphosis prevention in instrumented posterior spinal fusion.

STUDY DESIGN: This is a retrospective, single-institution, cohort study. OBJECTIVES: To evaluate the association of Mersilene tape use and risk of proximal junctional kyphosis (PJK), after surgical correction of adult spinal deformity (ASD) by posterior instrumented fusion (PIF). PJK, following long spinal PIF, is a complication which often requires reoperation. Mersilene tape, strap stabilization of the supra-adjacent level to upper instrumented vertebra (UIV) seems a preventive measure. METHODS: Patients who underwent PIF for ASD with Mersilene tape stabilization (case group) or without (control group) between 2006 and 2016 were analyzed preoperatively to 2-year follow-up. Matching of potential controls to each case was performed. Radiographic sagittal Cobb angle (SCA), lumbar lordosis, pelvic tilt, sacral slope, and pelvic incidence were measured pre- and postoperatively, using a deformity measuring software program. PJK was defined as progression of postoperative junctional SCA at UIV ≥ 10°. RESULTS: Eighty patients were included: 20 cases and 60 controls. The cumulative rate of PJK ≥ 10° at 2-year follow-up was 15% in cases versus 38% of controls (OR = 0.28; P = 0.04) with higher latent period in cases, (20 vs. 7.5 months), P = 0.018. Mersilene tape decreased risk of PJK linked with the impact of the following confounders: age, ≥ 55 years old (OR = 0.19; 0.02 ≥ P ≤ 0.03); number of spinal levels fused 7-15 (OR = 0.13; 0.02 ≥ P ≤ 0.06); thoracic UIV (T12-T1) (OR = 0.13; 0.02 ≥ P ≤ 0.06); BMI ≥ 27 kg/m2 (OR = 0.22; 0.03 ≥ P ≤ 0.08); and osteoporosis (OR = 0.13; 0.02 ≥ P ≤ 0.08). CONCLUSIONS: Mersilene tape at UIV + 1 level decreases the risk of PJK following PIF for ASD. These slides can be retrieved under Electronic Supplementary Material.

Radius of Curvature in Patient-Specific Short Rod Constructs Versus Standard Pre-Bent Rods.

BACKGROUND: Recent studies support the need for sagittal alignment restoration when performing lumbar degenerative spinal fusions. The development of patient-specific spine rods (PSSRs) may help maintain or improve sagittal alignment in these surgeries. METHODS: A retrospective review was conducted for patients who underwent posterior spinal surgeries involving 4 or less levels. The preplanned PSSR radii of curvature (ROC) was compared with standard prebent rods with a ROC of 125 mm. All surgeries were performed at a single institution by 3 surgeons from September 2016 through October 2018. Data were then compared using a 2-tailed paired t test. PSSR had either 1 or 2 definitive ROCs. RESULTS: For rods with 2 ROCs, the "cranial" curve was measured between the upper instrumented level and L4 or L5. The "caudal" curve was measured between L4 or L5 and the lower instrumented level. The PSSR with 1 ROC and the caudal portion of the rods with 2 ROCs were significantly smaller than the industry standard ROC. CONCLUSIONS: PSSR demonstrate more acute ROC than industry standard rods. In PSRs, the most lordosis occurs between L4-S1 and flattens out at the thoracolumbar junction, mimicking the normal distribution of lumbar lordosis. PSSRs could help achieve or maintain sagittal alignment and prevent the sequela of flat back syndrome.

Pelvic Incidence Changes Between Flexion and Extension.

STUDY DESIGN: Retrospective single-center. OBJECTIVES: To investigate changes in pelvic incidence from flexion to extension. To assess interobserver error in the measurement of pelvic incidence. BACKGROUND: Pelvic incidence (PI) has been considered a static parameter since it was originally described. But recent studies have shown that PI can change with age and after spinal procedures. Changes in PI based on position have not been investigated. METHODS: Seventy-two patients who had obtained flexion and extension radiographs of the lumbar spine were identified using strict inclusion and exclusion criteria. PI along with pelvic tilt (PT), sacral slope (SS), and lumbar lordosis were measured in both flexion and extension by two independent measurers. Variations in all parameters and interobserver measurement reliability were analyzed for the entire group. RESULTS: PI changed significantly from flexion to extension with a general tendency to decrease: mean (-0.94°), p <.044. However, these changes might have had opposite vectors, and exceeded | 6°| (measurement error) in 20% of cases, with a maximum of 12°. Inconsistencies in changes of SS, as opposed to PT from flexion to extension, were found to be the major factor determining changes in PI (p >.001). Obesity significantly contributed to differences in PI between flexion and extension (p = .003). CONCLUSIONS: PI is a dynamic parameter that changes between flexion and extension. Changes in SS are the main factor involved in these changes, implicating movement through the sacroiliac joints as the cause. Obese patients have greater changes in PI from flexion to extension. LEVEL OF EVIDENCE: Level II.